Your coloring possibilities are endless with this beautiful array of opaque colors. These 10 opaque colors are specifically formulated to color the Resin Obsession super clear resin. Included in your purchase are these ten colors in 1 ounce containers:
Directions for use: Warm the part A super clear resin. The ideal temperature is approximately 100F for about 5 minutes. This will make the resin a thinner consistency and easier to mix in your desired color. Gently stir the pigment into the epoxy resin until you reach the depth of color desired. Do not exceed 10% of the total weight of Part A as this may prevent the system from curing. *The amount of color you mix into the resin contributes to the total amount of Part A.* Measure the appropriate amount of Part B super clear hardener remembering that the super clear resin mixes two parts A to one part B. Carefully mix Part B into Part A for two to three minutes. Scrape the sides of your cup and stir utensil several times during the process. Cast as desired.
See how to use the pigments in two minutes:
A few additional suggestions for success:
*The opaque red and opaque magenta pigments may slightly stain a plastic mold. This can be minimized by wiping a thin coat of petroleum jelly inside the mold cavity before casting.
*For the best results, pigments should be used within one year of purchase.
Have more questions? Check out the Resin Obsession color pigments FAQ.
Colors contain epoxy resin and conform to ASTM D-4926.